UNTITLED POST

 

Q and A – A discussion, - scalar waves, scalar antenna, - esoterics, - scientific speculations

NOTICE! This post is NOT scientifically based, consider it for LEISURE only.

Q - Why are we here on this blog with this post?

A - Here we will afford more speculations, on facts that are not provable from the mainstream science point of view.

Q - Hmm... Will we afford here more speculations from an esoterics point of view? So, is here much room left for this kind of 'technical' speculation?  There were claims in some comments on the 2012portal that on the other blog you don't afford irresponsible affirmations or speculations. What is an irresponsible speculation?

A - The phrase speaks 'eo ipso'.

Q - And, are the speculation on this blog more 'responsible'?

A - Here, we will feel more free to make speculations, which are scientific based at some degree, but for which we have not, or there is not enough data to draw a scientific based assumption.

Q - And, the responsibility?!

A - It is not about responsibility, but rather do draw some lines into some ideas for some kind of research, as the case might be. 

Q - Ok! Let's take the subject of the plasma antennas. What is, or may be the subject of the speculation?

A - We have to speculate that a high or medium pressure gas discharge tube may work as a plasma antenna.

Q - And?!

A - Most likely it will not work, at least from a scientific point of view, and at least for RF domain.

Q - But?!

A - From an esoteric point of view, we can speculate that a higher light emission plasma will broadcast higher scalar waves amounts.

Q - Hmm... Again about esoterics, instead of commercial interest or 'hi-tech' science. Just wait to go into speculations!...

A - We are already...

more content to come...

---

UNTITLED

 OPEN SOURCE EVERYTHING - QUESTION EVERYTHING

Q and A - A discussion: Esoterics, Light Communities, Scientific Speculations

---

The Hydrogen Medium/High Pressure Discharge Lamp

Another kind of source of PINK light color for esoteric use


Q and A - Researchment proposal, questions and speculative expectations

Depiction of experimental medium pressure

discharge lamp with internal electrodes

ED28/ED90 outer bulb, E39/E40 base

Q - What is it intended to be, how to look like?
A - A medium or high pressure discharge lamp, in a form of an ED/BT fluorescent bulb with an E(X)39/40 screw cap.


content to come...

The 'Filament Laser Diode Bulb'

The 'filament laser diode bulb', as a new kind of lighting source for our Areas of Light and Contact Zones.

Image of 'filament LED' bulbs 

(for illustration and educational purpose only)

THE TACHIONIZED HID XENON BULB WITH SYNTHETIC GEMSTONES

The TACHIONIZED HID xenon bulb with synthetic gemstones, a LIGHT SOURCE for ESOTERIC purposes.


i.e.: Synthetic Emerald, Synthetic Aquamarine, a.o. 

Now, just imagine it...

 

If you are a specialist, consider it in a shape of ED(BT)28(90) or ED(BT)37(120) HID ‘protected metal halide lamp’ (thus it might even be, or rather not, a metal halide lamp). It is more desirable to be rather a xenon HID lamp (similar in shape and appearance of a ‘protected metal halide lamp’), due to its more day-light spectrum of light, than that of the 6500K (‘day-light’) metal halide lamps.

Consider also that instead the ‘metal halide’ arc-tube you have a xenon discharge arc-tube.

And, instead of the protection tube of the ‘protected metal halide lamp’, you have a ‘synthetic gem’ tube, but not for the protection (explosion proof) of the arc tube, but instead, to pass the ‘day light’  of the xenon discharge through the synthetic gem tube, (which should have most as possible of the original gem properties).

Discussion to come...

THE MEDIUM PRESSURE MERCURY LAMP – A LIGHT SOURCE FOR ESOTERIC PURPOSES

The Fluorescent Coated Medium Pressure Mercury Lamp as a First Attempt to Achieve a Light Source for Esoteric Purposes

http://lightcommunitiesdevelopment.blogspot.com/p/lights-for-esoteric-purposes-description.html


NOTICE! 

This post is NOT enough based on scientific data. 

As a whole, please consider it for LEISURE only.



RESEARCH PROPOSAL


What is it to be, how it looks like...
What to put together from what is available in nowadays tech...


- Proposed shape/outlook: A fluorescent coated ED28/ED90 bulb shape with an E40/Mog (or E33) screw cap. As case may be, also a ED37/ED120.

Depiction of ED28 and ED37 medium pressure discharge lamps with sized arc tube, and clear (uncoated) outer bulbs, for a better description of inner details.

- Proposed/expected rated power range: 75W for ED28/ED90 bulb, and 150W for ED37/ED120 bulb.

- Expected compatible ballasts: Mercury or metal halide lamp ballasts of  70/75/80W, in the first case, and 150/175W ballast in the second case.


- Discharge tube: That of the shape used for 400W mercury lamp, but with electrodes and filling similar to the 75/80 mercury lamp for the first case, and that of the 1000W discharge tube with electrodes and fillings of the 175W mercury discharge tube in the second case.
In fact there is a larger 75 or 150W arc-tube but with proper (not oversized) electrodes and gas filling in each of cases.

- Fluorescent Coating: That in use for coloured cold cathode 'neon signs' (in fact Ar+Hg) or to the coloured hot cathode fluorescent tubes, corresponding to the full range of colors achieved with all of these.
 There is the need of sufficient amount of spectral emission (of the medium pressure arc discharge) in the appropriate wavelengths which properly match the sensivity (in wavelength terms) of the coating, in order to have a convenable conversion work of the phosphorous coating.


The research goal is to find how much can be decreased the pressure in an arc-tube of this type in order to achieve a convenable output of UV wavelength spectrum for the fluorescent coating in discussion, and a moderate temperature of the outer bulb.

What to expect in fact with a 75; 150W mercury lamp, oversized in both the arc tube and the fluorescent coated outer bulb, but with its proper electrodes and Ar/Hg filling...?


The lamp will be connected with the 75/80W, as case with the 150/175W ballast...

The expectance is that after the warm-up of the discharge at the intended lowered pressure, the current should be around the rated current of the ballast (secondary winding, if it's a transformer type). Let say 0,7...0,9A for the first case and 1,5...1,8A for the second one.



Discussion to continue...

---

Related Links:

The Effects of Mercury Vapour Pressure:  http://www.lamptech.co.uk/Documents/M3%20Spectra.htm


MA Medium Pressure Lamps:  http://www.lamptech.co.uk/Documents/M8%20MA.htm

---

LIGHTS FOR ESOTERIC PURPOSES - LINKS

Links of interest in http://lightcommunitylighting.blogspot.com:



SUBJECT: Lights for Esoteric Purposes


Understanding the Blue Light: http://lightcommunitylighting.blogspot.com/2018/04/blog-post_23.html

Understanding the Pink Light: http://lightcommunitylighting.blogspot.com/2018/02/understanding-pink-light.html

The Medium Pressure Discharge Lamp: http://lightcommunitylighting.blogspot.com/2018/04/blog-post_13.html

The Pink Light Egg-shaped Bulb - 1: http://lightcommunitylighting.blogspot.com/2018/04/blog-post.html

Halogen Hybrid Incandescent/Discharge Lamp: http://lightcommunitylighting.blogspot.com/2018/01/blog-post_31.html


E33 Screw Caps and Lampholders: http://lightcommunitylighting.blogspot.com/2018/01/e33-screw-caps-and-lampholders.html


Specific Lights: http://lightcommunitylighting.blogspot.com/2018/01/blog-post.html

Post-top Outdoor Lights: http://lightcommunitylighting.blogspot.com/2018/01/blog-post_11.html

Post-top Outdoor Lighting Fixture - 1st Design - Large Size - 16" (available in full dimensional details): http://lightcommunitylighting.blogspot.com/2018/01/blog-post_22.html

Post-top Outdoor Lighting Fixture -1st Design - Large Size - 18":
http://lightcommunitylighting.blogspot.com/2018/02/blog-post.html

Post-top Outdoor Lighting Fixture - 1st Design - Large Size - 20":
http://lightcommunitylighting.blogspot.com/2018/02/post-top.html

Post-top Outdoor Lighting Fixture - 1st Design - Large Size - 23":
http://lightcommunitylighting.blogspot.com/2018/01/blog-post_25.html


Post-top Outdoor Lighting Fixtures - 2nd Design - Medium Size: http://lightcommunitylighting.blogspot.com/2018/02/blog-post_30.html

Post-top Outdoor Lighting Fixture - 2nd Design - Medium Size - 14":
http://lightcommunitylighting.blogspot.com/2018/03/blog-post.html

Post-top Outdoor Lighting Fixture - 2nd Design - Medium Size - 17":
http://lightcommunitylighting.blogspot.com/2018/03/blog-post_12.html


Notice!

What we try to achieve and discuss here are the outdoor lights for esoteric purposes, for the outdoor environment of Light Communities, Areas of Light, and also for Tachyon Chambers yards or Contact Zones.

 No matter are there achieved by lighting fixtures with nowadays lighting bulbs,  or by further development of HIDs or other light sources...

 We are developing in this way a new kind of specific purpose 'lights' beside of those for plant growth, aquarium and others.

It's true, till now, none a lamp manufactures or researcher had invested time or money for this scope,... but this is us here, under this movement, who try to discuss them and forward it into research for future achievement...

A BLOG FOR LIGHT COMMUNITIES DEVELOPMENT

LIGHT COMMUNITIES DEVELOPMENT - SUBJECT: ELECTRICITY/ENERGY




Subjects of interest according to lightcommunitylighting.blogspot.com/

but here there will be left more room to make speculations, which are scientific based at some degree, but for which we have not, or there is not enough data to draw a scientific based assumption.

Discussion might be conducted only for interested groups, not for the general public.